Struct ScanProposalOptions 

pub struct ScanProposalOptions {

    pub scan_to_model: [f64; 16],
    pub schema: ProposalSchema,
    pub classification_angle_degrees: f64,
    pub pairing_angle_degrees: f64,
    pub min_wall_thickness_metres: f64,
    pub max_wall_thickness_metres: f64,
    pub default_wall_thickness_metres: f64,
    pub min_wall_overlap_fraction: f64,
    pub min_wall_length_metres: f64,
    pub min_wall_height_metres: f64,
    pub min_slab_area_square_metres: f64,
    pub default_slab_thickness_metres: f64,
    pub max_slab_thickness_metres: f64,
    pub level_snap_metres: f64,
    pub interior_point: Option<[f64; 3]>,
}

Fields

scan_to_model: [f64; 16]

Row-major 4x4 similarity (rotation, uniform scale, translation) from the frame the segmentation report is in to the IFC model frame (Z up, metres). Default identity: the report is already in it.

schema: ProposalSchema

Default IFC4. Non-vertical cylinders become IfcFlowSegment in IFC2X3 (no IfcPipeSegment there) and IfcPipeSegment otherwise.

classification_angle_degrees: f64

Horizontal / vertical tolerance in the model frame. Default 10 degrees.

pairing_angle_degrees: f64

Two wall faces pair when parallel within this. Default 5 degrees.

min_wall_thickness_metres: f64

Paired faces make one wall when at least this far apart (a smaller gap is refused). Default 0.05 m.

max_wall_thickness_metres: f64

… and at most this far apart. Default 0.6 m.

default_wall_thickness_metres: f64

Thickness of a wall seen from one side only. Default 0.2 m.

min_wall_overlap_fraction: f64

Faces must overlap along the wall by at least this share of the shorter face to pair. Default 0.5.

min_wall_length_metres: f64

Vertical faces shorter (horizontally) are not walls. Default 0.5 m.

min_wall_height_metres: f64

Vertical faces lower than this are not walls. Default 1 m.

min_slab_area_square_metres: f64

Horizontal planes smaller than this are not slabs. Default 1 m^2.

default_slab_thickness_metres: f64

Thickness of a slab seen from one side only. Default 0.2 m.

max_slab_thickness_metres: f64

A ceiling and the floor above pair when this close (and at least minWallThicknessMetres apart). Default 0.6 m.

level_snap_metres: f64

Wall and column ends within this of a floor or ceiling extend to it; half of it decides which side of a horizontal plane walls stand on. Default 0.3 m.

interior_point: Option<[f64; 3]>

A point inside the scanned space (model frame). Places single wall faces whose normal does not face the scanner, and decides floor or ceiling when no wall touches a horizontal plane. Default: the area-weighted mean of the plane centroids.

Trait Implementations

impl Clone for ScanProposalOptions

fn clone(&self) -> ScanProposalOptions

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for ScanProposalOptions

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for ScanProposalOptions

fn default() -> Self

Returns the “default value” for a type.

impl<'de> Deserialize<'de> for ScanProposalOptions

where ScanProposalOptions: Default,

fn deserialize<__D>(__deserializer: __D) -> Result<Self, __D::Error>

where __D: Deserializer<'de>,

Deserialize this value from the given Serde deserializer.

impl PartialEq for ScanProposalOptions

fn eq(&self, other: &ScanProposalOptions) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Serialize for ScanProposalOptions

fn serialize<__S>(&self, __serializer: __S) -> Result<__S::Ok, __S::Error>

where __S: Serializer,

Serialize this value into the given Serde serializer.

impl StructuralPartialEq for ScanProposalOptions